MULTI TOOL

800MM EXTENSION FOR CHINESE MULTITOOL

800mm long and designed to fit on a 26mm wide drive shaft tube (not a 24mm tube - please check your drive shaft tube width first before ordering).

There are Two types of extension to choose from (Please see the photo)

The first type (Type A) is with an aluminium outer tube with a 7 spline drive shaft (the number of grooves on the drive shaft) and comes with a red coloured connector. Will fit Qualcut machines as well as other Chinese brand multi-tools.

The second type (Type B) is a chromed outer tube with a 9 spline drive shaft (the number of grooves on the drive shaft). Comes with a grey coloured connector. Will fit most Chinese brand multi-tools with a 9 spline drive shaft.

When purchasing please check the number of splines (grooves) on your machines drive shaft and select the option on this page from the two types (either Type A or Type B) that you require. Please also check that your outer tube width is 26mm and not 24mm.

If for any reason it doesn’t fit your machine it can be returned for a full refund.

Comes with 12 month warranty.

Circular cutting blade. 40 tooth tungsten carbide tipped blade.  For use with our 58cc brush cutter.  Works well at cutting Scrub such as Gorse , Blackberry, Bracken etc
 

Circular cutting blade. 40 tooth tungsten carbide tipped blade.  For use with our 58cc brush cutter.  Works well at cutting Scrub such as Gorse , Blackberry, Bracken etc
 

Tri cutting blade. For use with our 58cc brush cutter and 33cc multi-tool and is designed to cut longer grass around your property. After one side wears the blade can be turned over to use the other side as a fresh sharp blade.
 

Tri cutting blade. For use with our 58cc brush cutter and 33cc multi-tool and is designed to cut longer grass around your property. After one side wears the blade can be turned over to use the other side as a fresh sharp blade.

This 2 pack of Cutting Tri Blades includes the multiple item courier delivery discount.  
 

Nylon cutter head for brush cutter and multi tool. For use with our 58cc brush cutter and 33cc multi-tool and is designed to cut shorter grass and trim areas close to fences, trees etc.

Fits 10mm left hand thread

Nylon cutter head for brush cutter and multi tool. For use with our 58cc brush cutter and 33cc multi-tool and is designed to cut shorter grass and trim areas close to fences, trees etc.


Fits 10mm left hand thread

Nylon metal cutter head for use with our 58cc brush cutter and 33cc multi-tool. Super Fast Easy to change Cords System. Simply unscrew, put in fresh nylon cords and retighten. Extra replacement cords are available at your local hardware store.
 

Nylon metal cutter head for use with our 58cc brush cutter and 33cc multi-tool. Super Fast Easy to change Cords System. Simply unscrew, put in fresh nylon cords and retighten. Extra replacement cords are available at your local hardware store.
 

Pole Chainsaw  attachment to fit on Chinese 4 in One multi-tools. End Attachment only (as seen in photo) without Bar and Chain and without 800mm drive shaft and without 800mm drive shaft tube

Designed to fit on a 26mm wide drive shaft tube (not a 24mm - please check your drive shaft tube width first before ordering)

Available in either 7 or 9 splines (number of grooves on the drive shaft). If purchasing please check the number of splines (grooves) on your machines drive shaft (Located inside the 26mm wide outer tubing).

Comes with 12 month warranty
 

HEDGE TRIMMER ATTACHMENT FOR CHINESE MULTITOOL 

Hedge trimmer attachment to fit on Chinese 4 in One multitools. End Attachment only (as seen in photo) without a 760mm drive shaft and without an 800mm drive shaft tube. 

Available in one type only 9 spline drive  (the number of grooves on the drive shaft).

Designed to fit on a 26mm wide drive shaft tube only (not a 24mm wide drive shaft tube - Please check the width of your machine's drive shaft tube before ordering.
 

If purchasing please check the number of splines to be sure that your machines drive shaft has 9 splines as this is the only type that we have in stock.

Comes with 12 month warranty
 

PULL STARTER FOR CHINESE POWER TOOLS

Pull Starter unit that will suit most Chinese Post Hole Borers, Chinese Brush Cutters or Chinese 4 in One Multitools or similar Chinese made power tools (not chainsaws) sold on power tool web sites and Trademe.

There are 2 types of starter to choose from. Please select from either type “A” or type “B” (as shown in the display photo)

There is an area on this page above to select your choice (Pull Starter Selection)

Note: Unfortunately these will NOT fit Stihl, Husqvarna, Oleomac, Homelite or other popular brands.
 

 2 PACK PULL STARTER FOR CHINESE POWER TOOLS

Pull Starter unit that will suit most Chinese Post Hole Borers, Chinese Brush Cutters or Chinese 4 in One Multitools or similar Chinese made power tools (not chainsaws) sold on power tool web sites and Trademe.

There are 2 types of starter to choose from. Please select from either type “A” or type “B” (as shown in the display photo)

There is an area on this page above to select your choice (Pull Starter Selection)

Note: Unfortunately these will NOT fit Stihl, Husqvarna, Oleomac, Homelite or other popular brands.